Mobility Velocity - Recommended Settings

Created by Datapel Integration, Modified on Fri, 6 Jun at 4:11 PM by Datapel Integration

Description

This article describes additional settings for Mobility Velocity.

Detail Steps

There are some additional recommended setting (additional to default) in regards to Mobility Velocity.

Kindly ensure on the below:

Make sure that the current WiFi access points are set to different channels and that channels are not “overlapping” within the warehouse.
Recommend CH1 – CH6 – CH11 then back to CH1 – CH6 – CH11 depending on the size of the warehouse (This is a recommended best practice. Velocity will struggle and not work properly if channels are “overlapping”).

WiFi Advanced setting on handheld device:

Fixed IP for all handheld devices (assigned by customer)
Frequency band set to AUTO
WiFi Roaming set to ENABLED
Set Country Code to AU (Australia)
Roaming Trigger set to 65dB
Background scan set to 10 sec

More WiFi settings to set, please apply following steps (below is following CypherLab RS50 setting):

1. Go to Setting > WIFI.
2. Click on the top right hand corner with …
3. Select “Advanced”.
4. Go to “Wi-Fi frequency band”.
5. Change from “Automatic” to “2.4 GHz only”.\

Related Information

Installing WMS Mobility Server